HDL 4CH 7A RGBW Driver

157.00 incl. VAT

In stock

Compare

KNX 4CH 7A RGBW Driver has 4 RGBW driving channels, each channel has the output capacity of 7A.The four channels can be controlled separately or using RGBW combination control. PWM linear dimming can set the dimming response time and the upper and lower limits of the dimming. The dimming is stable and diversified to meet the needs of different occasions.

  •  PWM liner dimming
  •  Dimming lower / upper limit setting
  •  Dimming fade time setting
  •  1 bit switch state response
  •  1 byte brightness state response
  •  3 bytes RGB color response *
  •  State recovery after power on
  •  Staircase light
  •  Flashing light
  •  Scene function (10 scenes supported for each channel)
  •  Logic function
  •  Threshold value
  •  Up to 5 sequences, with 24 steps for each
  •  Custom on/off *
  •  Color selection and transformation for combination mode *
  •  The polarity protection function of DC power supply will prevent from destroy the device when the positive and negative electrodes are connected in reverse.
  • Note: * Only for RGBW combination mode.
  • Dimensions 183mm×84mm×39mm
    Net weight 212g
    Housing material ABS, PC, Aluminum
    Installation Fixed with screws
    Protection rating (Compliant with EN 60529) IP20

Main Menu

HDL 4CH 7A RGBW Driver

157.00 incl. VAT

Add to Cart